Ripstation v4.4 Main User Guide
100-5-01-000
Ripstation v4.4 – User Manual
Page
28
of
43
4.5 Starting a New Batch
4.5.1 Batch Setup
In the main Ripstation screen, click the ‘New Batch’ button and the Start a New
Batch dialog box shown in figure 4.14 appears.
Figure 4.14– Batch Properties Dialog Box
•
Source Device
– select the model of robotic device you are using, or IDE/USB
Drives to use internal or external CD/DVD Rom drives with no robotics.
•
Edit
– additional edits can be made such as COM port, Shake mode (on/off) and
for MFD 7602/7604 devices, the option to select which side the drives are on.
Shake mode was introduced to address sticking discs being double loaded into
drive tray. It is not supported by the 7601 robotic loader.
Figure 4.15 – Source Device Edit Dialog Box
•
Number of CDs
- key in the number of CDs in the batch, or 0 to rip indefinitely.
•
Target device
– Use Generic for any portable devices, or select from the
manufacturer list to enable file format and grooming. Added direct support for
Vantage Media servers with cddbinfo.txt file output.
