Ripstation v4.4 Quick Start Guide
100-5-01-000
Ripstation v4.4 – User Manual
Page
12
of
43
3.0 Ripstation Quick Start Guide
Before using the Ripstation software, please use the following steps as a ‘quick start’
guide to set the initial parameters and perform a simple MP3 batch rip.
1. Open the Ripstation software and on the main screen click the Preferences
icon. The dialog box shown in figure 3.0 opens.
2.
Select the ordering of lookups as AMG First and the multiple FreeDB options Second
then Click OK. You can buy your AMG look ups by clicking on the Purchase link
(NOTE:
Use of AMG metadata from Macrovision is undertaken under the terms of the
flow down agreement attached as Annex A, please read it carefully)
.There is
also the option to select a local source in the cdplayer.ini file.
Figure 3.0 – Preferences Dialog Box
3. In the main screen click the new batch icon and the batch properties dialog
opens.
4. If using a 7602/4 device, you will need to configure the side what drive is on, and
choose the correct COM port. To do this from the Source device pull down box,
select 7602/4, the click the edit button beside it: