OptiPrinter CD/DVD Inkjet Printer
ZZ 004 805 - 31 -
There may be circumstances in which you need to adjust the position of the mask in relation to
the printer (i.e., different print area tolerances between different makes of media may require
tiny adjustments). If this is the case, you can do so by changing the dimensions of the mask
origin.
As you will see from the above diagram (Fig. K), the maximum distance you can move the
mask is 1mm in any direction. It is therefore advisable to change the unit of parameter from x
1mm to x0.1mm as shown below in Fig. L. This way, tiny movements can be made to align the
mask perfectly.
Parameter Unit:
As mentioned above, the parameter unit can be changed from x1 mm to x 0.1 mm movements
allowing you to adjust your mask by tiny increments at a time so that a perfect mask can be
achieved.
Changing this setting to x 0.1mm will result in all measurements on the Mask interface being
shown as tenths of a millimeter as shown in Fig. M on the next page.
Mask Origin
X = 1
Y = 1
1mm
Fig. L
Fig. K