Operating Instructions
Stapling Plier pneumatic
130/1916 P/PU/PUX | 130/2516 P/PU/PUX
Page:
4
Mod.:
02/2019
ET
543
Seite 4 von 8 14.02.19 P:\Technik\ZANGEN\Zange 130\Bedienungsanleitung\englisch\Manual 130-1916 P Pneum engl 02_2019.docx
-
Improper monitoring of tool parts which are subject to wear and improperly executed repair
work.
-
Any type of manipulation of the tool.
5
Initial commissioning
To make the stapling device ready for operation after delivery, the following tasks must be carried out:
-
Check the equipment for completeness
-
Load the tool with staples
-
Connect the compressed air
Before the stapling device is put into operation, please read all instructions in this manual. This stapling
machine may only be put into operation by trained personnel.
When the stapling machine is ready for operation, it is prohibited to touch the
stapling ejection opening or the running stapler!
DANGER OF INJURY!
Oxygen or combustible gases may not be used as a propulsion source for pressure
driven machines.
6
Miscellaneous
This universal pneumatic-operated plier 130 is an all-purpose stapler for all stapling jobs such as carton
blanks, telescope-type boxes, slide lids, carton trays, carrying handles etc. By-pass legs ensure a high
level of strength. The legs lie flat and the tips are bent back into the cardboard. This means safety for
people and contents!
Depending upon the carton quality, the following staples MG
®
130 (crown size 13 mm) with different leg
lengths can be inserted:
MG
130/10
with 10 mm leg length
MG
130/12
with 12 mm leg length
MG
130/16
with 16 mm leg length
7
Loading the magazine
1. Take grip of staple pusher, press slightly inside, make small rotation to the left and pull
staple pusher out backwards from the magazine.
2. Put staple strips onto the staple carrier now visible and slide them into the magazine.
3. Insert staple pusher again. Make sure the smooth surface at locking grip is on top.
Press grip completely inside and lock by a small rotation to the right.
