Version: 21/03/2017
Filename: NA-MHF-19-20-COD-E_version2.doc
© Meyrat SA 2017
3 / 26
1 Introduction
These assembly instructions describe your electric spindle. It has been manufactured according to the
most advanced technology and according to recognised safety regulations.
Improper use or misuse of the spindle, or commissioning of the machine without following the
instructions for use of this assembly instruction excludes a guarantee from MEYRAT SA.
The assembly instructions must therefore be read and understood by all persons who will be dealing
with the electric spindle.
1.1 Identification
Your electric spindle is identified as follows:
Item no.:
___________________________
Serial number:
___________________________
Year of manufacture:
___________________________
1.2 Intended users and objectives of these assembly instructions
Intended users
These assembly instructions are intended for:
-
Assembly personnel (mechanics, electricians, electronics specialists) at the location of the
constructor of the machine.
-
Operators of the machine at the
customer’s location.
-
Service technicians at the client’s location
It is presumed that the following qualifications have been acquired:
-
Mechanical work: training as a skilled mechanic (or equivalent training)
-
Electrical work: training as a skilled electrician or electronics specialist (or equivalent training).
-
Maintenance technician: training as a skilled mechanic (or equivalent training)
In addition, it is presumed that these persons have basic knowledge in the handling of electric
spindles.
Objectives of these assembly instructions
These assembly instructions should allow all intended users to perform their work reliably and
professionally. These instructions must therefore be read and understood by all persons responsible
for work on or relating to the electric spindle.
1.3 Directions for using the assembly instructions
Organisation and handling of the service instruction manual
In the assembly instructions you will find instructions concerning the assembly, installation, operation,
maintenance, and troubleshooting of your electric spindle, supplemented as necessary with notes on
safety and danger.
Instructions on the assembly and installation of peripheral devices are not included in the assembly
instructions. These data are found in the corresponding documentation on these peripheral devices.
