Meyra SMART 9.906, Operating Manual, Page: 36 / 68

1
2
36
RETAINING STRAP
The retaining strap serves to strap in
a person sitting in the electric wheel-
chair.
– Additional stabilisation of the sit-
ting position.
– Prevents the user from sliding for-
wards out of the electric wheel-
chair.
– Continuous adjustment to suit the
user’s needs.
The seat belt is screwed on, from the
outer side, at the respective back sup-
port holder (1).
☞
Note:
The retrospective assembly of a re-
taining strap is only to be carried
out by a specialist workshop!
!
Attention:
The retaining strap is not part of
the retaining system for the elec-
tric wheelchair and/or user during
transport in a handicapped trans-
port vehicle (HTV).
Retaining strap with buckle
Fastening the retaining strap
– Pull both belt halves to the front
and slide the catch halves together
so that they latch together (2).
☞
Then carry out a pull test.
!
Attention:
Make sure that no objects are
trapped between belt and the
body! – Thus you avoid painful
pressure points.