X
1
2
3
21
ARM SUPPORTS
The arm supports (1) serve at the same
time as arm support, clothes guard
and wind guard.
!
Attention:
Do not grab between the seat
and back tubes and arm supports.
– Danger of squashing!
• Do not lift the wheelchair using
the side elements.
• The wheelchair should only be used
with the arm supports assembled!
Adjusting the arm support to the
wheel circumference
The distance X to the arm support
running parallel to the wheel diame-
ter (X) is to be aligned to the selected
wheel position.
!
Attention:
The distance X between the driving
wheel and the arm support should
be as small as possible. – Danger of
crushing!
– Remove drive wheel (see Drive
wheels section).
– Loosen clamping screws (2).
– Remove the screwed connections
(3), if available.
– Position the arm support (1) to the
equalising wheel circumference.
– Tighten the clamping screws (2).
Summary of Contents for MEX-S 1.134
Page 1: ...GB We move people OPERATING MANUAL MEX X MODEL 1 130 MEX S MODEL 1 134...
Page 56: ...56 NOTES...
Page 57: ...57 NOTES...
