Meyra iChair DYNAMIC 1.623 Operationg Manual Download

Page: 24 / 64

3. Check the position of the handlebar.

The position of the handlebar is to be ad-
justed so that the electric wheelchair can
be steered safely.

☞

The angle of the handlebar can be ad-
justed after loosening the spanning le-
ver (3).

☞

The angle of the steering unit (6) can be
adjusted after loosening the spanning
lever (5).

☞

After removing the handwheel (4) the
steering rod can be slid into the desired
height.

4. After the adjustment press the span-

ning levers on tight and again and
screw the handwheel back in tightly.

☞

Therefore observe chapter

Position-

ing the steering unit

on page 26.

5. Switch the driving module on.

☞

Press the On/Off-key (7) on the con-
trol panel of the driving module.

☞

Therefore observe chapter

Switching

on the driving module

on page 17

PRE-OPERATION CHECKS

Before starting to drive, the following should
be checked:

☞

the battery charging condition,

☞

the setting of the preselected final
speed.

–

Therefore observe chapter

Driving mod-

ule

on page 17.

Summary of Contents for iChair DYNAMIC 1.623

































































Search results

Summary of Contents for iChair DYNAMIC 1.623

Reviews:

Related manuals for iChair DYNAMIC 1.623

Brands by name

Popular brands

Meyra iChair DYNAMIC 1.623, Operationg Manual

Search results

Summary of Contents for iChair DYNAMIC 1.623

Reviews:

Related manuals for iChair DYNAMIC 1.623

Brands by name

Popular brands