background image

26   

Tyre pressure of pneumatic tyres

Maximum tyre pressure is printed on the 
tyres on each side.

Full tyre pressure – steering wheel
Standard:
2.5 - 3.5 bar = 36 - 50 psi

Full tyre pressure – drive wheel
Standard:
3.0 - 4.0 bar = 44 - 58 psi
Ultra-light running tyres:
6 bar = 87 psi
High pressure:
8 bar = 116 psi

Applied norms

The shower and toilet wheelchair complies 
with the norm:

 

ISO 17966: 2016

TECHNICAL DATA

All data given in the < 

Technical data

 > refers 

to the standard version.
The overall length depends on the position 
and size of the drive wheels.
If not noted otherwise the dimensions are 
determined with drive wheels of ø 610 mm 
(24“).
The widths were determined with a han-
drim distance of 15 mm.
Dimensional tolerance ±15 mm, ± 2°.

Calculation of the max. user weight:

The maximum total load is calculated on 
the basis of the unloaded weight of the 
shower and toilet wheelchair and the 
maximum passenger weight.

Additional weight due to subsequent addi-
tions or luggage reduce the maximum per-
missible passenger weight.

Example:
A user wishes to take luggage with a weight 
of 5 kg. Thus, the maximum user weight is 
reduced by 5 kg.

Summary of Contents for 8013039





































Reviews: