1
3
2
31
Reassembly of SCOOTER-compo-
nents
☞
Before assembly a visual check of
the single components should be
conducted for completeness and
damages.
☞
Here the following is to be ob-
served closely:
– The brackets to receive the drive
may not be bent.
– The locking bolt to connect the
front and rear chassis is at the end
of the safety wire.
– The connection cables are not
damaged.
Inserting the rear chassis
First put the drive into drive mode.
1. Lift the front chassis at the seat
tube (1) and at the same time swiv-
el the rear chassis forward so that
the support tubes of the rear chas-
sis glide onto the brackets of the
front chassis (2).
2. Let the rear and front chassis slide
down over the seat tube as far as
possible (3).