1
2
26
SUPPORT.CASTORS
Code.691
To increase tilting stability each side
can be equipped with one bent tub-
ing with two small wheels which can
be inserted into the lower frame tub-
ing from the rear (1).
Support.castor.length:
The support castors must protrude be-
yond the drive wheels, identically on
both sides, by at least their diameter
in order to have an adequate anti-tip
function.
To achieve sufficient tilting stability,
both support castors should be posi-
tioned parallel to each other. – Dan-
ger of accidents by overturning to the
side!
!
Attention:
Support castors do not provide suf-
ficient protection against tipping
over in certain situations.
Stick-in.support.castors
The insertable support castors can be
inserted from the back into the lower
frame tubes (1).
Removing/inserting. the. support.
castors
– Depress the spring button (2) in or-
der to remove/insert a support cas-
tor.