1
2
3
22
PUSH.HANDLES
The height adjustable push handles
are about 30 cm continuously height
adjustable, turnable in steps of 30°
and secured against being pulled out.
Push. handles. with. clamping. de-
vice
☞
In doing so, hold onto the push
handle that is to be adjusted with
one hand.
Height adjustment:
1. Loosen the clamping screw with
the handwheel or clamping lever
(2) so far that the respective push
handle can be adjusted into the
desired position.
Angle adjustment:
1. In order to turn the push handles,
loosen the clamping screws with
the handwheel or clamping lever
(2) or pull out the push handle and
reinsert it in the desired position.
Extracting/inserting:
1. Press down the respective spring
button (3) in order to extract or in-
sert the push handles.
2. Afterwards retighten the clamp-
ing screw with the handwheel or
clamping lever (2).
Special. features. of. the. clamping.
lever
The clamping lever (2) can be turned
into an operation position that is com-
fortable for you.
– For this pull the clamping lever (2)
outward (direction of the arrow),
until the teething is released.
– After turning the clamping lever
(2) let the teething snap back into
place.
