1
2
12
Drive-/push mode
!
Attention:
Only switch the electric wheelchair to
push mode when it is standing still for
positioning or in case of emergencies,
but not on slopes/hills.
☞
The electric magnetic brakes are
switched off in the push mode.
– A braking of the electric wheelchair is
then only possible by switching to the
drive mode.
☞
Grab hold of the push handle and back
support in order to shunt the electric
wheelchair.
Selecting the push mode
1. Switch off the operating module be-
cause the pushing will otherwise be
made difficult by the electric system.
☞
Therefore observe operation manual
<
Operating module
>.
2. Disengage the brakes [1].
☞
Therefore observe chapter
The electric wheelchair can now be pushed.
Selecting the motor mode
1. Activate the brakes [2].
☞
Therefore observe chapter
2. Switch the operating module on.
☞
Therefore observe operation manu-
al <
Operating module
>.
The electric wheelchair is now ready for use
again.
