1
2
4
3
17
STABILISER ROD
The stabiliser rod (1) stretches the back strap
at the top, serves to attach the head support
and is secured against being pulled out.
☞
Note:
Only in combination with height ad-
justable push handles.
The stabiliser rod can be removed in order
to fold the wheelchair.
Removing/attaching the stabiliser
rod
1. Depress the locking buttons (2) of the
quick release axle on both sides.
2. Remove [3] or insert [4] the stabiliser
rod.
☞
Always carry out a tensile test after in-
serting the axles!
☞
After inserting the stabiliser rod the
locking button must still protrude
some millimetres from the axle. – The
stabiliser rod is secured.
☞
The locking bolt of the axle is to be kept
clean. A functional fault may occur in
the case of contamination due to sand
or earth or in the event of freezing of
moist cold air.
