2
3
3
25
Wheel camber
The wheel camber can be set to 1°, 3°
or 6° by way of different axle mount
adapters (2).
☞
Note:
The adjustment should be carried
out by the specialist dealer!
Adjusting the wheel camber
– Detach drive wheels. – Do this by
pressing in the stop knob at the
centre of the wheel and pulling off
the wheel.
– Loosen the clamping screws (3) of
the tube clamp on each side.
– Pull out the quick-release axle
adapter (2).
– Insert the quick-release axle adapt-
er (2) with the desired wheel cam-
ber into the receptacle tube.
– Slightly tighten the clamping
screws (3) of the tube clamp on
each side.
– Attach the drive wheels (view
quick-release axle).
– Adjusting the toe-in (view toe-in).
Toe-in
The toe-in can be adjusted by rotating
the mount adapter (2) for the axle.
☞
Note:
The adjustment should be carried
out by the specialist dealer!
– Slightly loosen the clamping screws
(3) of the tube clamp on each side.
– It should be just possible to turn
the axle mount adapter (2) with
the open-end spanner.
