Meyra-Ortopedia 2.663 Operating Manual Download Page 26

Page: 26 / 56

LOADING.AND.TRANS-

PORTATION

☞

Do not use the back support, arm

supports or steering column in or-
der to lift the

SCOOTER

. Attention:

Switch the

SCOOTER

off before

lifting it!

Loading

The

SCOOTER

can be loaded with the

aid of ramps or lifting platforms.

☞

Note:

Observe safety and general han-

dling instructions <

Electronic vehi-

cles

> chapter <

Ramps and lifting

platforms

Transport.in.vehicles

. Attention:

Transport of the

SCOOTERS

may

only be carried out in driving direc-
tion!

To save space for the transport in ve-
hicles a reduced

SCOOTER

-dimension

can be required.

☞

view chapter

SCOOTER-dimen-

sion reduction

Transport.of.people.inside.a.

motor.vehicle

To determine if your individual

SCOOT-

is approved as a seat for transport

inside a motor vehicle, please look at
the type plate.

Summary of Contents for 2.663

























































Search results

Summary of Contents for 2.663

Reviews:

Related manuals for 2.663

Brands by name

Popular brands

Meyra-Ortopedia 2.663, Operating Manual

Search results

Summary of Contents for 2.663

Reviews:

Related manuals for 2.663

Brands by name

Popular brands