M o d e l M 3 2 3 0
3 |
P a g e
INTRODUCTION
Congratulations on the purchase of y
our new Meyer’s Manure Spreader!
With proper use and preventative maintenance, it will give you many years of trouble-free operation.
•
At the front of this manual is a Product Registration and Inspection Certificate. Be sure your dealer has
completed this certificate and forwarded a copy to the manufacturer to validate the
manufacturer’s warranty.
•
The product model and serial number are recorded on this certificate for your convenience and for proper
identification of your spreader by your dealer and the manufacturer when ordering repair parts.
•
The serial number plate is found on the upper left front corner of the spreader box or stamped in the left
channel at the front. For information on ordering repair parts, refer to the repair parts section of this manual.
Orders must list the complete description, correct part number, and total amount required.
•
All references to right hand and left hand apply to the product as viewed from the rear of the machine and
facing the direction of forward travel.
•
You are urged to study this manual and follow the instructions carefully. Your efforts will be repaid in better
operation and service as well as a savings in time and repair expense. Failure to read this manual and
understand the machine could lead to serious injury. If you do not understand instructions in this manual,
contact either your dealer or Meyer’s Equipment Manufacturing Corp.
This
SAFETY ALERT SYMBOL
means
ATTENTION! BE CAREFUL
!
YOUR SAFETY IS
INVOLVED
! It stresses an attitude of
HEADS UP FOR SAFETY
. When you see this symbol,
be alert to the possibility of
PERSONAL INJURY
and carefully read the message that follows.
WARNING
:
NEVER OPERATE WITHOUT ALL COVERS, SHIELDS AND GUARDS IN PLACE. KEEP HANDS, FEET
AND CLOTHING AWAY FROM MOVING PARTS. SOME COVERS AND GUARDS IN THIS MANUAL
HAVE BEEN REMOVED FOR ILLUSTRATIVE PURPOSES ONLY. FAILURE TO HEED MAY RESULT IN
SERIOUS PERSONAL INJURY OR DEATH.
Contact Information
Meyer’s Equipment Mfg. Corp.
701 W Bus Cty Rd A
P.O. Box 406
Dorchester, WI 54425
Phone: (715)-654-5200
Fax: (715)-654-5558
Visit Us Online At:
www.emcspreaders.com
Summary of Contents for M3230 Tandem
