background image

10

What is Covered: 

Meyer Products, LLC, warrants to the original purchaser of Meyer® brand products that they will be free from defects in materials or 

workmanship, with the exceptions stated below. No person is authorized to change this warranty or to create any additional warranty on Meyer

® 

products.

How Long Coverage Lasts: 

This warranty runs for a period of two years from the date of purchase on any purchase of a complete Power Box Package. 

If the Package is registered online at www.meyerproducts.com within sixty (60) days of purchase, your warranty for the Package will be extended for a period 

of three years. In addition to the warranties covering a complete Power Box Package and Structural Steel, you will receive a warranty for a period of one 

year from the date of purchase on individual parts, components, or accessories. All foregoing warranties apply only to an original purchaser of the product 

if the product is installed by an authorized Distributor/Sub-Distributor and terminate if the product is sold or otherwise transferred. Some states do not allow 

limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

What is Not Covered: 

This warranty does not cover:

• 

Problems caused by failure to follow the product instructions, failure to maintain the product as described in the Operator’s Manual, or failure to maintain proper levels of lubricants;

• 

Problems caused by contamination or restriction of lubricant systems, or damage resulting from rust, corrosion, freezing or overheating.

• 

Paint or expendable snowplow parts such as pins, runners, cutting edges, chrome plating, springs and markers.

• 

Damage to any machine to which the products are mounted, or the suitability of any product for machines which are not fitted with the appropriate heavy-duty snow plow service 

   preparation parts.

• 

Damage caused by usage that is not in accordance with product instructions.

• 

Any snow plow, or any part, component, or assembly thereof, which has been modified or altered.

• 

Problems caused by using accessories, parts, or components not supplied by Meyer Products.

• 

Cost of tax, freight, transportation or storage charges, environmental charges, solvents, sealants, lubricants or any other normal shop supplies.

• 

Problems caused by collision, fire, theft, vandalism, riot, explosion, lightning, earthquake, windstorm, hail, water, flood, or any other Acts of God.

• 

Liability for damage to property, or injury to, or death of any person arising out of the operation, maintenance or use of the covered product.

• 

Products with missing or altered serial numbers.

Meyer

®

 Snow Plows 

Limited Warranty

Summary of Contents for power box 810

















Reviews: