1. Press down button until float light
turns blue.
2. Push lift arm down until there is
slack in the chain.
4. Remove crankstand from lift frame.
5 . At t a c h c ra n k s t a n d to
a-frame. Adjust crankstand until
crankstand comes into contact
with the ground and then turn
1 to 2 revolutions.
6. While slightly pushing the lift
frame towards vehicle pull handles
on either side to disengage pins then
twist until the leg locks the pin in the
open position.
7. Disconnect one piece electrical plug and install weather cover on male end.
8. Back vehicle away from plow
assembly.
Meyer Products assumes no responsibility for installations not made in accordance with these instructions.
(14)
Dismounting Plow
3. Ensure the support kickstand
is in the upright position. Failure
to do so will allow the lift frame
to fall forward when dismounting.
Summary of Contents for 73200
Page 3: ... 2 Black Iron Parts List ...
Page 5: ... 4 Black Iron Parts List ...
Page 13: ... 12 E73 Hydraulics ...
