Mex K633X90 Instruction Manual Download Page 26

Cleaning & Maintenance

Operation

The hood is equipped with 3 speed control and a lamp. Control buttons are
located on the front edge of the range hood canopy.

 

Light On/Off Button

Switch  the  htin  system  on and off.

Blower On/Off and Low Speed Button

Switches the extractor motor on and off at low speed. Used to

provide a continuous and silent air change in the presence of

light .cooking vapors.

Blower On/Off and Medium Speed Button

Switches the extractor motor on and off at medium speed.

Suitable for most operating conditions given the optimum treated

air flow/noise level ratio.

Blower On/Off and High Speed Button

Switches the extractor motor on and off at high speed. Used

for eliminating the highest cooking vapors emission,

including long periods.

Blower Off with Delay Timer Button

Switches the extractor motor off at the selected speed with 3

minutes delay to off for the first time press. With 7 minutes delay to

off for the second time.

SURFACES :

 Wash with warm soapy water and a soft sponge. 

Never use abrasive detergent, scouring pads, steel wool or 
solvents on any part of this appliance as this will cause irreparable 
damage. Dry the kitchen hood using a cloth that does not produce 
fluff.

ALUMINIUM FILTERS :

 Wash in the dishwasher, it is advisable to 

stack them vertically to avoid food residue sticking to them. Or 
soak it in a degreasing agent until grease dissolve and rinsing
them under the tap, then rinse off.      

- 13 /Eng -

Summary of Contents for K633X90





























Reviews: