
Installation
Wall drilling and bracket fixing
Wall mounting
•
Draw a vertical line on the at the center of the wall.
•
From bench top (see A), drawing a horizontal line (see B) above minimum
installation height level.
•
Make a reference point at C, Repeat this step on the other side.
•
Drill 8mm holes at center of marking points. Insert wall plug in the wall.
•
Fix the hood body to wall using 2 (ST5 x 35) screw, tighten the screw firmly.
Note: Adjust the hood bod y alignment if necessary.
•
Place mounting bracket on the wall at desired height level, aligning bracket
center at vertical line (see D).
8
- 9 / Eng -
Summary of Contents for K633X90
