MEWOI MEWOI6100, User Manual, Page: 15 / 18

-13-
measuring data and automatically stored in the memory with a code; press
HOLD
key again to release the hold state, and the leaker continues its
measuring; in case stored data reached to 60 groups, press
HOLD
key
again, the “
FULL
” symbol will display, which means storage memory is full;
press
HOLD
key to cancel “
FULL
” flickering and return to measuring mode.
2
）
Press
HOLD + POWER
keys to enter into data access mode and display
Unit 1 storage data automatically; and then press
HOLD
key again to turn
the page of stored data;
NULL
will display when there is no data in stored in
the memory, press
POWER
key to exit data access mode.
3
）
After entering into data access mode, press
HOLD
key for more than 3
seconds will clean up all stored data; When
the leaker displaying “
dEL
”
symbol, it means that it has finished cleanup process, and then return to
measuring state automatically.
7. Data Upload
Make good connection of company with RS232 or USB communication wire
of the Tester, switch on the Tester and run monitoring software, and if the
software displays that interface is open and the connection is successful,
then it can read the stored historical data, upload to company and preserve.
Monitoring software has the function of online real-time monitoring and
historical inquiry, dynamic display, with the maximum, minimum, and