-7-
1.
USB data download interface
2,
3.5 inch color LCD screen
3.
Host
4.
Up and down arrow keys and
MEM
control keys
5.
Host
POWER
button
6.
Detector probe hook (2pcs)
7.
Detector probe (2pcs)
8. X
detector
9.
Power indicator,
10.
Detector
POWER
button
11.
Detector insulation rod interface
12.
Working signal indicator
13.
Detector battery bottom cover
14. Y
detector
15.
Telescopic insulation rod (2pcs)
VII
．
Operation
Please check all parts of the meter carefully
before usage, to see whether there is any
damage. And make sure no damage before
usage.
According to manual instructions to install the
battery
1. Host Power On/Off
Press
POWER
button to power on, the instrument will
displays the LCD screen, Press
POWER
button to power off. If
LCD display is relatively dark after power on, it is possible that
battery voltage is low. Please replace battery. 5 minutes after
powering on the meter, if it remains idle, an auto-power off
procedure starts to preserve the battery life and LCD will continue
flash until the complete switch off takes place after 30 seconds. In
case of LCD continuous flash, press
POWER
button, then the
meter will continue to work.
2. Detector Power ON/OFF
Press the
POWER
button to turn on, the POWER indicator
light, the detector into the test mode, and then press the
POWER