11
• A cold device may only be turned on only in a warm room after any
condensation on the surface has evaporated.
• Make sure there is an adequate cooling air flow if you put your
device into a built-in cabinet.
• Do not set up/suspend your device directly next to or above a
heater; this could impair the cooling of the device.
• No burning candles or vessels with liquid may be placed on or
above the device.
Hot wax and liquids that get into the interior of the device will
destroy the electric components of your device.
In these cases the electrical safety of the device can no longer be
guaranteed.
• Thunder storms are a danger for electrical devices. If lightning hits
the power cable, the device can be damaged, even if it is switched
off.
During thunder storms, disconnect the mains plug from the socket
or from the SW80.
• The SW80 should be cleaned only with a soft, dry cleaning cloth
(e.g. microfiber cloth).
• If significant soiling nevertheless occurs, the surface can be
cleaned with a slightly moist soft cloth.
3 Connecting, switching on and off
Power connection
Connect the SW80 to the wall socket with the accompanying power
cord.
Use the power switch to switch the SW80 on and off.
Switching on
Switch on the SW80 using the power switch.
After it is switched on, the LED will light up blue at first, which
means it is searching for a Bluetooth partner device.
If it does not recognise a Bluetooth partner device, the SW80 swit-
ches to the plugged connection if one exists.
The SW80 automatically switches on from standby mode when the
TV set is switched on.
5 minutes after the TV set is turned off, the SW80 switches to
standby mode.
Power connection
Power switch
