background image

14

8. Autofocus measuring flash

The integrated AF red-light beam of the mecablitz
supports the automatic focusing of autofocus TTL
cameras. When the prevailing light is insufficient
for automatic focusing, the mecablitz will project a
pattern of red vertical stripes onto the subject as
soon as the camera’s release is lightly touched.
The camera’s autofocus system then focuses the
picture by this striped pattern.

Notes:

• When the camera’s autofocus system is on, the

electronic circuit will automatically activate the
autofocus measuring flash whenever the 
prevailing light is insufficient for the exposure.

• The autofocus measuring flash cannot be activa-

ted in every operating or autofocusing mode of the
camera. It only supports focusing priority (one-
shot AF: see camera’s operating instructions). Use
of the autofocus measuring flash is not possible
with shutter release priority (Al Servo AF).

• The range of the autofocus measuring flash

depends on the speed of the lens (maximum
aperture)! With an f/1.8 standard lens of 50 mm
focal length, the range is approx. 6-10 m (depen-
ding on the sensitivity of the camera’s AF sen-
sor).

Fig. 5:  AF red-light beam

 AF red-light beam

Summary of Contents for Mecablitz 34 AF-3 C




















Reviews: