2. Mounting the flash
2.1 Mounting the flash on the camera
Turn off the camera and the flash by the
main switch!
• Push the locking slide (”LOCK”) to the right.
• Slide the flash foot completely into the
camera’s accessory shoe.
• Then push the locking slide ("LOCK") to the
left and fasten the flash unit.
2.2 Connection to the camera
The flash is triggered via the hot shoe contact
in the camera’s flash shoe.
If the camera’s flash shoe does not have a hot
shoe contact then a synchronising cable can
be used to establish the link between the
camera’s X socket and the sync socket of the
flash.
Please note: The flash must be switched
off before the synchronising cable is plug-
ged in or disconnected.
2.3 Removing the flash from the camera
Turn off the camera and the flash by the
main switch.
• Push the locking slide (”LOCK”) to the right.
• Withdraw the flash from the camera’s acces-
sory shoe.
☞
☞
☞
64
k
705 47 0068.A1 31.01.2006 13:45 Uhr Seite 64