48
12. PIP function
Monitoring with a video camera
The following example shows how you can monitor another room with a camcorder (video camera) while watching a TV programme.
Connect the camcorder to the TV set as described on Page 51 of the Operating Instructions for your TV.
1. Select the camcorder pro-
gramme position and switch
on the camcorder
2. Call the PIP function and, if
necessary, switch to ano-
ther programme position
3. Swapping the pictures
If this programme position has already been overwrit-
ten, you must programme another position as follows:
1. Call the station table by pressing the white key.
2. Call the sub-menu „Signal“ by pressing the white
key.
3. Press the appropriate coloured key to select the
socket marked „Camcorder“. Note that a camcor-
der must have been programmed previously in the
menu „Device connection“.
When the PIP function is switched on, both pictures
are identical.
If you then select another programme position with the
numerical keys, the PIP picture continues to display
the input from the camcorder and the main picture
displays the newly selected programme position.
The two pictures can be swapped by pressing the
key.
To switch off the PIP function, press the red key or the
key.
TV
PRG.
CAMCO
Monitoring
PRG.
ARD
Monitoring
0
1
2
3
4
5
6
7
8
9
Press this key on the remote
control....
The screen displays
Explanation
red
