Press the On / Off button [15]
Pressing the beeper volume button [16] cycles Low / High / Off
Press accuracy button [17] once to numerically display current
accuracy setting on the LCD. Press again, while the accuracy is
displayed (within one second), to change the current selection.
Switching the device on / off
Adjusting the volume
> High: Beeper symbol permanently displayed; text "Hi" for one
second
>Low: Beeper symbol permanently displayed; text "LOW" for one
second
> Off: No Beeper symbol displayed; text "OFF" for one second
Adjusting the accuracy
O P E R A T I O N
NOTE:
Make sure that the device is in vertical position and that the laser
sensitive area [5] is not partially covered during measurement. This can entail
false measuring results.
Subsequent presses will cycle through four accuracy options Fine /
Medium / Coarse / Ultra coarse.
Activate / deactivate LEDs
Press the LED button [18] to change the LED display. If activated, the
measurements are shown by the LEDs in addition to the display.
I 07
Summary of Contents for RS2-RG
Page 1: ...RS2 RG MANUAL ...