08 I
O P E R A T I O N
Pressing the volume [16] key for more than two seconds enters the
menu functions.
Menu items (e.g. SEn are shown non-flashing and may be browsed
by using the ARROW keys [17] and [18].
Menu items are selected by pressing the ENTER key [16]
Item values (e.g. On) are shown flashing and may be browsed by
using the ARROW keys [17] and [18].
Exit the Menu by pressing the ESC key [15].
User defined on-grade level:
An arbitrary level within -10 and +40mm around the
marking notch can be used as on-grade level. The user
defined on-grade level is set by pressing the accuracy
button [17] for two seconds while the device is in the
laser beam. If successful, you will hear a confirmation
beep and an asymmetric arrow symbol is shown on the
display. Outside the allowed area you will hear an error
beep and error code E30 is shown.
When the accuracy button [17] is pressed for two
seconds while out of beam, the on-grade level is reset
to default. If the device is switched off, the on-grade
level is automatically reset to default. If you want to
save the user defined on-grade level permanently, you
can choose this option in the menu (see Menu Entries -
.OFS).
Using the menu
The menu functions can be used to edit various
options. For most applications the factory defaults are
best choice. We recommend to change settings only in
special applications.
Summary of Contents for RS2-RG
Page 1: ...RS2 RG MANUAL ...