Metso Automation MAX Controls
••••
277573
••••
Chapter 7
Using Interaction Pages
Accessing Displays
You may access Interaction Page displays 9 through 13 from the
maxSTATION to view information and data specifically related to the DPU.
These specific Interaction Pages are covered in this chapter in some detail.
To access an Interaction Page display:
1.
Bring up the maxVUE Runtime main menu.
2.
Click the
System Status
button on the standard Vertical Toolbar to
open the System Status display.
3.
Click the Int
Page
button appearing on the Horizontal Toolbar.
Using Interaction Page 9 Display with a Workstation
Use Interaction Page 9 to display the DPU configuration data sent by a
Work-Station. Refer to Figure 7-1.
Startup
The
Startup?
prompt appears when manual intervention is required,
following a cold startup or fatal alarm. For example, an I/O module fails and
is not configured as an alarm-only module.
Backup Option
DPUs can be paired in a redundant configuration as described in Chapter 5.
To configure the backup option, enter Y in the Backup field.
