metrotek Bercut-ETL, Operating Manual

Page: 13 / 25

3.3 Setting-up procedures 13
3.3 Setting-up procedures
1. For device energy supply 9 V power unit is used.
2. The device is ready to work after all LEDs flash once for 1 second and
LINK indicator color has changed to green.
3. To perform analysis connect Bercut-ETL to the tested network.
4. To turn the device off disconnect the power supply unit.
Note:
if you want to restore default settings of the device hold the
button of a loop’s level choice (
L
) for 5 seconds. Three LEDs will
flash once for 1 second to inform you.
Bercut-ETL. Operating manual