METROTEC GSM, Operating Handbook, Page: 17 / 33

METROTEC
17
7 Configuration
7.1 Enablement of Configuration
Before parameters can be altered it is first necessary to overcome the disablement code. Only
then is access to additional pages possible. Enablement is effected as follows:
1. Select the page entitled CODE in the page selection table.
2. Press the key on the extreme right.
3. Keep pressing an arrow key until the NUMBER line is no longer backlighted.
4. Press the right-hand key. A input mask will open.
5. Press the right-hand key Press the right-hand key until your specific code (which was "1"
on delivers) is displayed.
6. Once the required code is displayed, press the right-hand key once more to confirm the en-
try. The message "Parameters free" appears in the next line.