***READ ALL INSTRUCTIONS BEFORE USE***
AIR FORCE QUICK DRAW
Model QD-1
The Air Force Quick Draw is designed to cut drying time by as much as 75%. It
provides Gentle Heat and dramatic air velocity to dry pets quickly and
thoroughly.
1. Insert the grounded Power Supply Cord (D) into a grounded three conductor
outlet.
IMPORTANT: PRODUCT MUST BE GROUNDED.
WARNING: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING
CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK!
2. Start your Quick Draw by pushing the toggle On/Off Switch (C) UP FOR On and
down for Off.
HOLD THE DRYER BY THE HANDLE
3. This machine can be used with or without the 6 ft. Hose (F). The hose is friction fit
at the end of the protruding steel tube.
4. The Air Concentrator (C) and the Air Flare (G) also fit directly at the end of the
steel tube to use without the hose to control the air velocity.
5. To use the Shoulder Strap (H), loop through the Handle (B), and join the clips
together.
6. To mount the Quick Draw under a grooming table or on a wall, screw the supplied
hook into the desired location, and hang the dryer Handle over the hook.
PLEASE NOTE:
DUE TO THE TREMENDOUS VELOCITY OF AIR PRODUCED BY THE AIR FORCE
QUICK DRAW, YOU MAY EXPERIENCE SOME AIR VENTING BY THE SEAMS, THIS
IS COMPLETELY NORMAL AND HELPS KEEP THE UNIT RUNNING EFFICIENTLY.
FILTER LIFE IS DEPENDENT ON USAGE. CHECK AND REPLACE WHEN
REQUIRED.
CAUTION: DO NOT SROP THIS APPLIANCE. MOTOR MALFUNCTION
CAUSED BY PRODUCT BEING DROPPED IS NOT COVERED UNDER
WARRANTY.
DELIBERATELY MADE BETTER IN THE U.S.A
®
