Metropolitan Industries ion Take Control MSE50V Operation Manual Download Page 8

Ion Technologies MSE50V

Sewage Pump

OPERATION MANUAL

Dated: 03/30/2020

Document Name: MSE50V_OM

Page 8 of 8

www.ionproducts.net

Ion|StormPro 1 Year/ 18 Months Year Residential Warranty

1. 

Coverage and Term. Metropolitan Industries, Inc. (“

Metropolitan

”) warrants to the original 

purchaser (the “Buyer”) of each Ion|StormPro product (the “product”), that any part thereof which proves to 

be defective in material or workmanship for a period of one year from date of installation or 18 months from 

date of manufacture, which ever comes fi rst, will be replaced at no charge with a new or remanufactured part, 

F.O.B. factory. Buyer shall be responsible for all freight charges and all costs of fi eld labor or other charges 

incurred in the removal and/or reinstallation of any product, part or component thereof.

2. 

Exclusions. 

THE WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS AND 

EXCLUSIONS:

 

(a) 

The Warranty excludes products or workmanship which becomes defective as a result 

of: (i) earthquake, fi re, storms, the elements or any other acts of God; (ii) normal wear and tear from use; 

(iii)  accident,  misuse,  abuse  or  neglect;  (iv)  modifi cations  made  by  Buyer  or  any  third  party,  other  than 

Metropolitan

; and (v) Buyer’s failure to properly install, maintain, service and/or operate the product under 

normal conditions and according to manufacturer’s instructions.

 (b) 

Metropolitan

 shall not be responsible for, and the Warranty shall not cover, extended 

damage which occurs because of Buyer’s failure to notify 

Metropolitan

 promptly in writing of apparent 

defects.

 

(c) 

Any part or component designated as manufactured by anyone other than 

Metropolitan

 

shall be covered only by the express warranty of the manufacturer thereof.

 

(d) 

The Warranty shall lapse upon Buyer’s failure to fully comply with the terms and conditions 

of its contract with 

Metropolitan

, including Buyer’s failure to pay the purchase price for the product or any 

portion thereof. Buyer’s subsequent compliance with the terms and conditions of any such contract, will not 

cause the term of the Warranty to extend beyond the time period set forth above.

 

(e) 

No actions taken by 

Metropolitan

 to correct a defect in a product shall extend the Warranty 

beyond the period set forth above. 

Metropolitan

 shall not be obligated to remedy any defect, where otherwise 

required pursuant to the Warranty unless and until Buyer notifi es 

Metropolitan

 in writing of the defect and 

then only if such notifi cation is made prior to the expiration of the period set forth above.

3. 

Process of Claims and Repairs. 

Metropolitan

 agrees that if the product or any part or component 

thereof shall fail to conform to the terms of this Warranty, 

Metropolitan

 shall replace such nonconforming 

product, part or component at the original point of delivery and furnish instruction for its disposition. Any 

transportation charges involved in such disposition and all costs of fi eld labor or other charges incurred in the 

removal and/or reinstallation of any product, part or component thereof shall be the responsibility of Buyer.

4. 

Limitation on Liability. Notwithstanding any provision to the contrary, 

Metropolitan’s

 entire 

liability  under  this Warranty  shall  not  in  the  aggregate  exceed,  and  Buyer’s  exclusive  and  sole  remedies 

are, to the extent permitted by law, shall be to secure replacement of the defective product. 

UNDER NO 

CIRCUMSTANCES SHALL METROPOLITAN BE LIABLE UNDER THE WARRANTY FOR 

ANY INDIRECT, PUNITIVE, SPECIAL, EXEMPLARY, CONSEQUENTIAL OR INCIDENTAL 

DAMAGES (INCLUDING LOST PROFITS, REVENUE, USE OR ECONOMIC ADVANTAGE).

5. 

Express Waiver of Any Other Warranties. 

THE EXPRESS WARRANTY SET FORTH IN THIS 

WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY METROPOLITAN, OR ANY OTHER 

PARTY, IN CONNECTION WITH ANY PRODUCT PURCHASED FROM METROPOLITAN. 

NEITHER METROPOLITAN, NOR ANY OTHER PARTY, MAKES ANY OTHER EXPRESS OR 

IMPLIED WARRANTY WHICH IS NOT SET FORTH HEREIN, AND METROPOLITAN HEREBY 

DISCLAIMS AND BUYER HEREBY WAIVES ALL IMPLIED WARRANTIES, INCLUDING THE 

IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS 

FOR A PARTICULAR PURPOSE.

6. 

Not Transferable. The Warranty may not be transferred and shall be void on the sale or other transfer 

of the product.

7. 

Products and Warranty Subject to Change. 

Metropolitan

 reserves the right to make revisions to its 

products and their specifi cations, and to revise this Warranty and related information without notice.

Summary of Contents for ion Take Control MSE50V









Reviews: