- 13/19 -
4-4 Remote Control Layout
This remote can operate all the CD drives, pre-amplifiers and integrated amplifiers of the
METRONOME TECHNOLOGIE
products.
IR Transmitter
To activate CD mode press on [CD] key, the remote locks on the CD
mode. The available functions are:
Direct access to the disk tracks by pressing on [1] to [0] keys.
PLAY TRACK function by pressing on the key:
>
NEXT TRACK function by pressing on key:
>>
PREVIOUS TRACK function by pressing on key:
<<
PAUSE function by pressing on key:
| |
STOP function by pressing on key:
REPEAT function by pressing on key [REPEAT]: Pressing this
key once time, the drive will play the disk indefinitely. Pressing a
second time the key, the drive will play the current track
indefinitely; and by pressing one more time, the drive will operate
on normal play mode.
OPEN function by pressing on key [OPEN], the tray will open.
This function is available on electric tray drives only.
STANDBY function by pressing on key [STANDBY], the drive will
enter on standby mode. If you have to keep the drive for a long
time without use, it is better to switch off the machine with the
main switch.
To activate AMP mode, press on [AMP] key. The remote locks on
AMP mode. The available functions are:
Direct selection of inputs of pre-amplifier or integrated amplifier
by pressing on key [1] to [9]. Number of inputs depends on
models.
MUTE function by pressing on key [MUTE]: this function will put
the output level at 0dB. Another press will activate the initial
output level.
VOLUME – function by pressing on key [VOLUME -]: this function
will decrease the output level.
function by pressing on key []: this
function will increase output level.
STANDBY function by pressing on key [STANDBY], the pre-
amplifier or integrated amplifier will enter on standby mode. If you
have to keep the drive for a long time without use, it is better to
switch off the machine with the main switch.
Remote control RC1
