manualshive.com logo in svg

Metrologic P5658 OptimusR, User Manual

Share
Download
Metrologic P5658 OptimusR User Manual Download Page 24

 

20 

S

AFETY 

N

OTICES 

 

 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a 
residential installation.  This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one of the following measures: 
 

•

  Reposition or relocate the receiving antenna. 

•

  Increase the separation between the equipment and receiver. 

•

  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

•

  Consult the dealer or an experienced radio/TV technician for help. 

 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation. 
 
Any changes or modifications not expressly approved by the manufacturer for compliance could void the user's 
authority to operate this equipment. 

Summary of Contents for P5658 OptimusR

































Reviews:

No comments

Brands by name

Popular brands

Load more brands