Chapter 3 Terminal Specific Function Library
21
Example
_KeepAlive__();
Description
Whenever this routine is called, it will reset the counter governed by the global
variable AUTO_OFF, so that the user's application program will keep on
running without suffering from being automatically shut down by the system.
Return
None
SetPwrKey
Optimus S
Purpose
To set the POWER key as the wakeup event.
Syntax
void SetPwrKey (int mode);
int mode; /* enable or disable the POWER key */
Example
SetPwrKey (1); /* enable the POWER key for waking up the terminal*/
Description
The parameter
mode
is set to one of the following values:
POWER_KEY_DISABLE (0)
The POWER key is disabled.
POWER_KEY_ENABLE (1)
The POWER key is enabled.
Return
None
shut_down
Purpose
To shut down the system.
Syntax
void shut_down (void);
Example
shut_down();
Description
This routine shuts down the system. Upon powering on, the system will always
restart.
Return
None
SysSuspend
Purpose
To shut down the system.
Syntax
void SysSuspend (void);
Example
SysSuspend();
Description
This routine shuts down the system. Upon powering on, the system may
resume or restart itself, depending on the system setting.
Return
None
Summary of Contents for Optimus R
