3.4 Connecting USB devices
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18
￭￭￭￭￭￭￭￭
890 Titrando
￭
Connect the Remote Box connection cable to one of the sockets
marked with
MSB
on the rear of the control instrument.
￭
Start the control software.
Figure 10
Connecting the Remote Box
You can connect the following instruments to the remote connector,
among others:
￭
849 Level Control (fill level monitoring in a canister)
￭
731 Relay Box (switch box for 230/110 volt alternating current sockets
and low-voltage direct current outlets)
￭
843 Pump Station (for complex sample preparations or for rinsing
external titration vessels)
The Remote Box also has an MSB socket at which a further MSB device,
e.g. a dosing device or a stirrer, can be connected.
You will find precise information concerning the pin assignment of the
interface on the Remote Box in the
appendix
.
3.4
Connecting USB devices
3.4.1
General
The 890 Titrando has two USB connectors (type A sockets) for peripheral
devices with USB interfaces. The Titrando functions as a USB hub (distribu-
tor) no matter how it is operated. If you wish to connect more than two
devices to the USB, you can also use an additional, commercially available
USB hub.