5.7 Connecting the Coulometer to a network
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28
￭￭￭￭￭￭￭￭
917 Coulometer
2
Enter and configure the barcode reader in the device manager.
Settings on the barcode reader:
Program the barcode reader as follows (also see manual for the barcode
reader):
1
Switch the barcode reader to programming mode.
2
Specify the desired layout for the keyboard (USA, Germany, France,
Spain, German-speaking Switzerland).
This setting must match the setting in the device manager.
3
Make sure that the barcode reader is set in such a way that Ctrl char-
acters (ASCII 00 to 31) can be sent.
4
Program the barcode reader in such a way that the ASCII character
02 (STX or Ctrl B) is sent as the first character. This first character is
normally referred to as the "Preamble" or "Prefix Code".
5
Program the barcode reader in such a way that the ASCII character
04 (EOT or Ctrl D) is sent as the last character. This last character is
normally referred to as the "Postamble", "Record Suffix" or "Postfix
Code".
6
Exit the programming mode.
5.7
Connecting the Coulometer to a network
The 917 Coulometer has a network connection (Ethernet). This can be
used to integrate your Coulometer in your network. You can, for example,
store data on a PC within the network or print reports on a network
printer. You will find information as to which settings are necessary for the
network connection in the
Device manager
chapter contained in the more
detailed manual.
Connecting the Coulometer to a network
Summary of Contents for 917 Coulometer
Page 1: ...917 Coulometer Manual Short Instructions 8 917 8002EN 2019 11 20...
Page 2: ......
Page 8: ......
