5.7 Connecting sensors
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26
￭￭￭￭￭￭￭￭
916 Ti
‑
Touch
NOTICE
The electrode cable is protected against accidental disconnection
of the cable by means of a pull-out protection. If you wish to pull
out the plug again, you first need to pull back the outer plug
sleeve.
5.7.5
Connecting the temperature sensor or electrode with integrated
temperature sensor
A temperature sensor of the Pt1000 or NTC type can be connected to the
Temp.
connector.
Connect the temperature sensor or the electrode with integrated tempera-
ture sensor as follows:
1
Plug the temperature sensor plugs into the
Temp.
sockets of the
Ti
‑
Touch.
Figure 10
Connecting the temperature sensor or electrode with
integrated temperature sensor
