PacketLINK User Manual
15
CLI Command
Description
vlanset op_mode
Enable or disable E1 channel vlan mode
op_mode:
0: disable
1: enable
Example: vlanset 1 (enable E1 channel vlan mode)
ceschset ch_no enable
[dest_ip] [dest_mac]
Set CESoPSN Channel and its destination IP and MAC
address of the remote device.
ch_no: E1 channel number (1~16)
enable:
0:disable
1: enable.
[dest_ip]: destination IP address. Can be omitted if disable
E1 channel.
[dest_mac]: destination MAC address.
Example 1:
Enable E1 port #1, set the dest_ip, then automatically get
the dest_mac address from the remote device only if the
local device can communicate with the remote device via
its WAN port.
Example: ceschset 1 1 172.16.1.2
Example 2:
Enable E1 port #1 and specifically set the destination ip and
mac address of the remote device.
Example: ceschset 1 1 172.16.1.2 AA:BB:CC:DD:EE:FF
cespwidset ch_no TrPWID
PrPWID
Set CESoPSN Channel TrPWID and PrPWID.
ch_no: E1 channel number (1~16)
TrPWID: Transmit PW ID.
PrPWID: Provision PW ID.
Example: cespwidset 1 1 1
