background image

LV2000 SPECIFICATIONS

 12

5   LV2000 SPECIFICATIONS

Disclaimer

Metrodata Ltd makes no representations or warranties with respect to the contents hereof and specifically dis-
claims any implied warranties or merchantability or fitness for any particular purpose. Further, Metrodata Ltd 
reserves the right to revise this publication and to make changes from time to time in the content hereof without 
obligation of Metrodata Ltd to notify any person of such revision or changes.

Trademarks

The Trademarks of other Corporations which may be used in this manual are hereby acknowledged.

Copyright © 2007 by Metrodata Ltd

All Rights Reserved

DTE Interfaces

Definition

DTE Interfaces

EIA-644 LVDS port

Framing

Unframed

Encapsulation

HDLC

Clocking options

LVDS port: DCE supplied clock

Line Rate

LVDS: 52Mbps             

Max packet rate 

93913  64 byte packets per second, full duplex at 52 Mbps

LED Indicators

DTE Tx and Rx Activity, LAN Speed & Activity 

Alarms & Loopbacks

None

LAN Port

Definition

LAN Interface

 RJ45, Auto switched MDI or MDI-X, or fixed MDI selected by bit-switch

Operating mode

Auto negotiated 10/100 Mbps Full / Half Duplex, or Manually selected by 

bit-switches.

Port filtering rate

148810 packets per second, 64 byte packets

MAC address table

4096 entries

Min/Max Packet size

64 bytes / 1536 bytes (larger packets are discarded)

General

Definition

Power supply

100-250 VAC, 50-60 Hz, 25 mA   or

-36 to -72 VDC, 100-200mA

Dimensions

202 x 132 x 44 mm (w x d x h) Enclosure only      

202 x 132 x 47 mm (w x d x h) Overall including feet

Environmental

Range

Ambient Temperature

0 degC to +50 degC

Storage Temperature

-20 degC to +70 degC

Relative Humidity

0% - 95% non condensing

Barometric Pressure

86 KPa - 106 KPa

Summary of Contents for 80-05-558














Reviews: