Radiance CWDM System 13
Mount the Chassis
The R4000 is intended for use in an office or industrial environment
with the chassis installed in a standard equipment rack.
Use the 6-32 self-tapping screws included with the R4000 to secure the
mounting brackets to the side panel.
You will need four (4) additional screws (not included with the R4000)
to mount the chassis into the rack.
Make sure that the mounting of the R4000 does not create a hazardous
condition due to an unbalanced load. Consider the overall loading
before installing any equipment onto the rack. Reliable grounding must
be maintained in the rack system. The R4000 is intended to be con-
nected to earth ground.
2
