manualshive.com logo in svg

METRObility Optical Systems CenturyStack 8112-01-M, Installation And User Manual

Share
Download
METRObility Optical Systems CenturyStack 8112-01-M Installation And User Manual Download Page 66

66

CenturyStack 8100 Managed Hub

User Authentication:  Allows you to configure user names and
passwords.

System Utility:

 Allows you to configure software downloads,

restart options, and Telnet session timeout intervals.

Monitoring System Information
The System Information Menu displays information about the system.
You can view the system software and hardware information and config-
ure the system configurations as shown below.

System Information

You can specify up to 48 alphanumeric characters each for the System
Name, Contact, and Location to provide useful information to all users
concerning the Hubs. The information on this panel should be kept
current so that persons requiring assistance know who to contact.

NOTE: You must select <Save> to save any changes you have made.

Summary of Contents for CenturyStack 8112-01-M





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands