manualshive.com logo in svg

METRObility Optical Systems CenturyStack 8112-01-M, Installation And User Manual

Share
Download
METRObility Optical Systems CenturyStack 8112-01-M Installation And User Manual Download Page 55

Managing Through the Mini Console      55

3. You are prompted to enter the password.

4. Enter the password. The console is unlocked.

Network Configuration
The Network Configuration menu allows setting the hub’s IP Address,
Subnet Mask and Default Gateway. The hub’s Network Configurations
must be set to compatible settings with LAN configurations to make
connections to the hub.

Network Configuration

Configuration

Default

IP ADDRESS

000.000.000.000

SUBNET MASK

000.000.000.000

DEFAULT GATEWAY

000.000.000.000

IP Address Configuration

1. Select “UNIT CONFIG” and press <Enter>.

2. Press <Next> until “NETWORK CONFIG” displays in the

Message Zone.

3. Press <Enter>. IP ADDRESS displays in the message zone.

4. Press <Enter>. The current IP address displays in the IP

address configuration menu. The first digit is blinking.

NOTE: The IP address is too long to be fully displayed and
it moves to the left as digits are entered.

Summary of Contents for CenturyStack 8112-01-M





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands