Chapter II
Digital Earth Tester
33
2.2.1.3. Recharging the accumulator pack (reminder: CA model ref. HX0086)
The symbol "
BAT
" will appear if voltage is too low. The accumulator pack must then be
recharged (without removing the pack from its housing).
Step 1
Connect the wall plug of
the supply terminal to the
mains plug and the jack
to the instrument
(lower box).
Step 2
Check that charging has
started (yellow LED).
Step 3
Wait until the charge-
complete light comes on
(red LED).
If the yellow LED flashes at the beginning of charging this means that:
-
either the battery level is very low
Æ
it will take longer than usual for the charge to
complete ;
-
or the battery is not correctly connected.
x
The MX 435D cannot be operated during the charging of the accumulator pack.
x
The accumulator pack cannot be charged outside of the instrument.
