The DSP Toolchest
438
can also be used as a constant amplitude mixer. The
Glide
parameter controls how quickly the
gain coefficient changes. This implementation of the switch uses a single-pole Low Pass Filter to
interpolate the gain. This means that the gain will change more quickly when it initially changes
and the change per sample will decrease as the internal gain approaches the selected gain.
Parameters:
A Gain
[-160, +12]
Sets the gain of the output that comes from the first input port.
B Gain
[-160, +12]
Sets the gain of the output that comes from the second input port.
Glide
[0, 1]
Sets the rate that the process uses to change the internal values of its cross-fade parameter.
Large values lead to faster changes. A value of 1 will cause the gain to change instantly, but
could lead to clicks. Very small values will cause the gain change to take place very slowly,
which can be used to provide a triggerable, automatic crossfade.
Master Bypass
{On, Off}
When bypassed, MIO Blend (LPF) will pass the signal from the A port(s) untouched.
See also:
MIOQuadOsc
• Synopsis: Quadrature Sine Oscillator
• Category: Signal Generator, Building Blocks
• Channels: 0
Description:
MIOQuadOsc is a signal generator which functions as a Quadrature Oscillator whose oscillation
frequency is precisely controlled by the
Frequency
parameter. The Quadrature oscillator gener-
ates a very pure, low-distortion sinusoidal waveform at one output and the quadrature (90 degree
phase shifted) waveform at the other output.
Parameters:
Frequency
[1m, 22k] Hz
Precisely sets the frequnecy of the oscillator.
See also:
MIOQuadNCO - Numerically Controlled Oscillator
,
,
MIOQuadLFO
• Synopsis: Quadrature Sine Low Frequency Oscillator
• Category: Signal Generator, Building Blocks
