MD9272 Leakage Clamp TRMS Meter with Power Function
Description of Functions
16
In this function, the position of the voltage terminals and the jaw is taken into account;
the red terminal should be connected to the line terminal and the jaw should be
connected so that the current flows toward load in the direction indicated on the jaw. In
this mode, data hold and registering of maximum and minimum values is possible by
using the
H
key.
Apparent Power Measurement
In this function the measurement of the apparent power together with the measurement
of the power factor are shown. If the load is inductive, the symbol
will appear on
the screen and if the load is capacitive, the symbol
will appear on screen.
In this mode data hold and registering of maximum and minimum values by using the
H
key is possible.
Phase difference measurement
In this function the phase difference measurement between the voltage and the current
is shown in degrees. The position of the voltage terminals and the jaw should be taken
into account: the phase line should be connected to line (red) terminal and the jaw
should be connected so that the current flows towards the load in the direction indicated
on the jaw. If this is not the case the phase angle difference shown will not be correct.
