7
www.portableappliancetesters.com.au/support
To start performing tests, from the main home screen you go to scan for devices and select your Metrel Tester, it will
then take you to the main data screen.
From here you enter the 4 Key pieces of
information.
Appliance ID - The unique Identification number
for the appliance
Appliance name - The description of the appliance
being tested
Retest Period (in months) - When the appliance is
next due for retesting.
Location - Where the appliance is stored, this is
how it will be grouped and reported when
downloaded to the computer.
We do not use the SHORTCODE function in
Australia
The 6 buttons on the bottom left are the same 6 buttons located on the front of your Metrel Appliance Tester and
allow you to navigate and control the machine.
The First step is to enter the four pieces of information on the appliance you are about to test.
Once that is entered, you press the Up, Down and OK/Test Buttons to navigate to the Simple Test menu on the
Delta, and then select the correct test for the appliance you are checking. Press Test to start the test process.
Once the test is completed and you are on the Overall Results screen of your Delta tester, you can press Save and
the Delta will beep, then press Print and a tag should come out.
You can then change whatever details you need to for the next test, then repeat the process.
