background image

A 1513 Discharge Link                                                              

Technical specifications

 

 

5  Technical specifications 

 

Discharge resistors: 

Discharging rate for capacitive load .............. < 0.6 s / µF at 10 kV 
Discharging resistance .................................. 100 k

 

 15 % 

 

Max discharging capacitance ........................ 10 

μ

F at 10 kV 

Max discharging current ............................... 100 mA at 10 kV 
Max discharging voltage ............................... 10 kV 
Intermitent operation ................................... 1:50 

 

Dimensions:

 

Case  ............................................................. ABS 
Dimensions (W x H x L) ................................. 200 mm x 120 mm x 90 mm 
Weight .......................................................... 1.44 kg 

 
 

Protection classification ................................ reinforced insulation  

 

Over-voltage category .................................. 0, no overvoltages 
Pollution degree ........................................... 2 
Degree of protection .................................... IP 54 

 

Reference conditions: 

Reference temperature range ...................... 25 

C ± 5 

Reference humidity range ............................ 40 %RH 

 60 %RH 

 

Operation conditions: 

Working temperature range ......................... -10 °C 

 50 °C  

Maximum relative humidity.......................... 90 %RH (0 °C 

 40 °C), non-condensing 

Working nominal altitude ............................. up to 2000 m 

 

Storage conditions: 

Temperature range ....................................... -10 °C 

 +70 °C 

Maximum relative humidity.......................... 90 %RH (-10 

 +40 

C) 

 ...................................................................... 80 %RH (40 

 60 

C) 

 

Summary of Contents for A 1513











Reviews: